¶ Third-Party flash for 16-key macro pad
The following firmware was made by a member of the KeebMonkey Discord (epid#8098)
This VIAL firmware gives you acess to features like tap dance,combos and the ability to set the color of the lights in the gui.
WARNING: SINCE THIS IS A THIRD-PARTY FIRMWARE KEEBMONKEY CANNOT OFFER ANY OFFICAL SUPPORT ONCE FLASHED
¶ Step 1: Download QMK Toolbox, VIAL and .bin file
You can download QMK toolbox from the github here (I recommend insalling all drivers when the option is presented)
You can download VIAL from the official site
the .bin file can be grabbed here
(Another third party flash option: https://github.com/thompson-vii/kb16_rev2_vial_fw )
¶ Step 2: Flash Firmware
Open QMK toolbox and point to the .bin file on your local machine, it will most likely be in your downloads by default
Unplug your macro pad and hold down the top left corner key while plugging it back in and hit flash while holding the key down, you should then see QMK toolbox display the follwing, once that's complete you can close QMK toolbox and unplug then plug the macropad back in, it should light up with the default rainbow pattern
¶ Step 3: Open VIAL
Now that the device has flashed VIAL should detect it automatically, when opening VIAL you should be presented with the following layout by default.
From here you are all set to start rebinding keys, setting your macros and anything else you perfer
