https://drivers.sfo3.digitaloceanspaces.com/SugarCube.exe
Press the button to trigger the radio, search for Bluetooth devices on the Bluetooth setting interface of your mobile phone or computer, and click Sugar Cube to pair and connect.
The function of the Bluetooth keyboard is the same as that of the USB keyboard, and the key value and key macro can be set through the configuration software.
It will automatically charge when it is attached to the base. It will be fully charged in about 2 hours, and will automatically stop charging when fully charged.
Connect to a computer and automatically switch to USB keyboard mode, which can be used as a USB keyboard, and can be switched to Bluetooth keyboard mode through configuration software. The configuration software has functions such as setting key values, key macros, RGB modes, firmware upgrades, and checking battery life.
Click the Select button to pop up the soft keyboard, select the button in the soft keyboard, click OK, and click Save Settings to save the key value to the Sugar Cube. Shift, Ctrl, Win, and Alt key combinations can select multiple, other keys can only select single. Single key, single key combination, key combination + single key-value setting can be realized. If you need more keys, you can use the macro function.
The key macro can be set up to 14 different keys, each key can be set as 1. key, and can set the holding time, the key interval of pressing a key, and the cycle times of the key macro.
Double-click the first cell of the key bar to pop up the soft keyboard, the same as 1. Press the key to select the key value. Double-click and hold the first cell of the time bar, a number input box will pop up, and you can enter
Enter 1-250 (that is, 0.01 seconds - 2.5 seconds). Double-click the first cell of the key interval column, and a number input box will pop up, you can input 1-250 (ie, 0.01 seconds - 2.5 seconds). If the hold time and key interval are not selected, the default is 0.01 seconds.
Other keys are set as above, and 1-14 key values can be set. You can enter 0-250 or infinite macro loops. Click Save Settings to save the key macro to
Sugar Cube.
After setting it as a macro, pressing the key will automatically send the key, and pressing the key again will stop sending the key.
RGB can be configured with 6 modes different modes.
1. Lucky Color ︓ Press the button to light up a random color, then fade out, the faster the button, the brighter.
2. Hand speed color︓ from green to orange corresponding to 5-20 keystrokes per second to display the hand speed.
3. Specify the color︓Press the button to light up the specified color, then fade out, the faster the button, the brighter.
4. The rainbow color ︓ color is automatically cycled, and the brightness is affected by the brightness of the color input box.
5. Specified color night light ︓ The specified color is always on.
6. Specified color breathing light︓The specified color is always on, and there is a breathing light effect.
Specify color You can select any color in the color input box. After selecting the color, click Save Settings to save the RGB settings to the Sugar Cube.
1. Firmware upgrade
Click Check for Updates, you can jump to the online disk, and check whether there is an update by comparing the file version number in the online disk.
If there is a new version, update the firmware through the following steps︓
1. Download the firmware to be upgraded, the file name is usually ︓SugarCube_V***.bin.
2. Click Select Firmware to select the downloaded firmware.
3. Click Update Firmware, wait for a while and you will be prompted that the upgrade is successful.
4. If the Windows system prompts that the device is not detected, please check the driver, you need to download the software in the network disk win firmware upgrade driver.exe, install it according to the following steps
1. Double-click to run, click Options->List All Devices on the menu bar, and all USB devices will be listed.
2. Select Unknown Device in the device list, and check whether the USB ID is 5262 0573. If there is no such device, you need to select the firmware first and click Update firmware before the device will appear.
3. Select the installed driver as libusb-win32, as shown in the figure.
4. Click Install Driver to install the driver and wait for the driver installation to complete.
5. Click Update Firmware again, after a while, it will prompt that the upgrade is successful.
If the battery is too low, it will enter the protection mode to avoid affecting the battery life. At this time, the button will not respond, and it will recover by itself after charging. Try to avoid disassembling the back cover to prevent slippage or poor contact.
The magnetic base comes with anti-reverse connection, please do not forcibly reverse connection, it will automatically protect the circuit.
If the circuit is protected, remove the key cap and shaft, and use tweezers or other metals to short-circuit the two contacts to restore